CNC WIRE EDM

CNC VERTICAL MILLING

 CNC TURNING

1 - Mitsubishi Wire MD+PRO II

1-DMG DMU 50 5 axis

1 - Doosan Puma 2100 High Performance Turning Center

 (4 axis independent) 12.6" x 9.8" travel with the

 30 Position tool holder

 Turning capacity: 10.2" Dia. x 20.5" length

capacity for 8.6" thick piece to 1110 lbs. with taper 

Swivel Rotary Table for simultaneous machining

 Swing capacity: 16" Dia.

 cutting to 25 degrees.

 19.6" X 17.7" X 15.7" Travel.

1 - Doosan Puma 240 Turning Center

1 - Mitsubishi Wire EDM FX-20

1-Doosan MV3016L VMC

 Turning capacity: 13.8" Dia. x 22" length

 (4 axis independent) 31" x 41" work piece

 30 Position tool holder

 Swing capacity: 15.5" Dia.

 capacity,  14" x 20" travel with the capacity 

 SMW RT160PY programmable 4th axis rotary table

 for 11.5" thick piece to 1760 lbs. with taper 

 16.1" X 32.2" X 20.1" Travel.

1 - Hwacheon Hi-EC031A Turning Center

 cutting to 24 degrees.

 Turning capacity: 15" Dia. x 23.6" length

1-Daewoo DMV3016 VMC

 Swing capacity: 20" Dia.

1-Mitsubishi Wire EDM DWC-90SB

 20 Position tool holder

 (4 axis independent) 14" x 18" work piece

 SMW RT160 programmable rotary index table

1 - Daewoo Puma 240 Turning Center

 capacity, 10" x 12" travel with the capacity

 16.1" X 32.2" X 20.1" Travel.

 Turning capacity: 13.8" Dia. x 21.6" length

 for  6.5" thick piece to 265 lbs. with taper 

 Swing capacity: 15.4" Dia.

 cutting to 12 degrees.

1-Daewoo DMV3016 VMC

 20 Position tool holder

1 - Daewoo Puma 240 Turning Center

1- Mitsubishi Wire EDM DWC-90SB

 16.1" X 32.2" X 20.1" Travel.

 Turning capacity: 11.4" Dia. x 19.7" length

 (4 axis independent) 14" x 18" work piece

 Swing capacity: 15.4" Dia. w/Live Tooling

 capacity, 10" x 12" travel with the capacity

1-Daewoo DMV3016 VMC

 for  6.5" thick piece to 265 lbs. with taper 

 24 Position tool holder

LATHES

 cutting to 12 degrees.

 16.1" X 32.2" X 20.1" Travel.

1 - Okuma, 22" swing x 57" centers

1-Mitsubishi Wire EDM DWC-90

1 - Okuma MC-60VAE

(3 axis independent) 13.7 x 17.7travel with the

 20 Position tool holder.

1 - Hardinge HLV-H Toolroom Lathe, 11" swing x 18" Ctrs.

Capacity for 6.6 thick

 25" x 59" x 24" travel.

1 - Okuma, 22" swing x 57" centers w/ accurate DRO.

EDM HOLE DRILLING

1 - Bridgeport Series  EZ-Trac SX

 12" x 30" travel

INSPECTION

1 - Current EDM ST300 EDM Drill

 EDM holes up to 14" deep. Electrodes

1 - Sharp Series MILLPWR

1 - Numerex Coordinate Measuring Machine

 0.004" - 0.256" dia., cutting depths of 50 to

 9" x 50" travel

 w/ travels of 28" x 28" & 18" on the Z axis.

 300 times hole diameter. Cut any conductive

 This is a computer integrated, ceramic

 material (hdn. steel, alloys, graphite, carbide)

MILLS

 machine, motor driven on all axis and is Direct

Computer Controlled with CMM-Manager software.

SINKER EDM

1 - Cincinnati No.2 Vertical, 11" x 26.75"

1 - Helmel Engineering CheckMaster CMM  

1 - Mitsubishi SINKER EDM M-35

1 - Hitachi No.2 Vertical, 10.5" x 28"

 Bridge type w/ 48 X 75 table. Mod 438-201. This

 CNC operation with 3R Electrode Tool

CMM uses CMM-Manager software.

 capacity, work piece of up to 9" X 18" X 30"

5 - Lagun Vertical w/DRO, 16" x 26"

1 - ROI Video Probe System

1 - Mitsubishi SINKER EDM M-25

1 - K&T Horizontal Mill

 Capable of up to 250X magnification and fully

 CNC operation with 3R Electrode Tool

 integrated with our Numerex CMM.

 capacity, work piece of up to 7" X 10" X 12"

RADIAL DRILL

2 - Starrett 785 Height

SURFACE GRINDERS

1 - American Hole Wizard, 5 ft. Arm x 13"

 Column

1 - Federal Pocketsurf I Surface Roughness Gage

1 - AMW Hydraulic,  20" x  40" travel

 Ra lu" to 250u" Accuracy +/- 4u" Meets

 DRILL PRESSES

 ANSI-B46.1, ISO, DIN and MIL Standards

1 - AMW Hydraulic,  12" x  24" travel

4 - Sensitive, Floor Model

6 - Granite Surface Plates

1 - Chevalier Hydraulic,  7" x 20" travel

 Ranging in size from 24" x 36" to 36" x 72" .

1 - Sensitive, 2 Spindle,  Floor Model

5 - Gardner No. 1 1/2,  10" x 15" travel

Also, a complete assortment of gage blocks, pin

 JIG GRINDER

gages, height gages, thread gages and other

1 - Medina End Grinder, Model B 

various measuring tools including

1 - Moore G-18  12" x 18" travel

micrometers to 18".  Inspection

UNIVERSAL ID/OD GRINDING

equipment is calibrated at regular intervals. 

JIG BORER

1 - Chevalier MOD GU27-1140A,

CAD/CAM

 10.629" swing X 39.3" max length

1 - Moore B-18,  12" x 18" travel

A network of computers in a Windows 

WELDING

HONE

 environment are used extensively for Machine

 Tool Programming and Design with AutoCAD,

1 - Lincoln Idealarc DC - 400

1 - Sunnen, .060"- 3.625" Dia. Capacity

 SolidWorks, Solid Edge and Mastercam software 

 Mig, Tig,, and stick welding

packages.

SAWS

1 - Lincoln Square Wave Tig 175

1 - HP 500 24 Color Inkjet Plotter

2 - Johnson Horizontal Cut-Off Saws, 12"

1 - Spray Welder

 Capacity

1 - HP 800 42" Color Inkjet Plotter

1 - DoAII Contour Saw, 13" Thick x 35.5 Throat

1 - Xerox #2510 Engineering Copier